Profitec / ECM Main CPU

The Clive team helped diagnosed the issue and I was able to replace the main CPU without much trouble. Hint: Take notes and pictures before disconnecting anything.

Works fine, just as expected. Installation was a bit involved. The new unit has a single screw lug, and it was on the wrong side. So I had to open it up and flip around the housing.

My Pro 700 wasn’t turning on properly and online troubleshooting led me to this part. It took about an hour to install, going slowly and being careful. Once I was done, my machine was as good as new.

Fast delivery. My espresso machine is now running smoothly.

Fixed the issue I was having with my syncronika machine. Only issue was the mounting holes were not tapped out

Daniel was a big help diagnosing our machine and getting back our morning ritual. Big thanks to the clive team.

My machine started acting up one day. First the brew pump would come on a second or two after the lever was pulled up. Then it progressed to sometimes coming on, sometimes not. The the brew pump would not come on at all. I replaced the CPU and it was back to normal.

Thrilled to have my machine back in order. This was the part I needed. Clive Coffee was so helpful and patient as we worked out what the issue was and helped me with the replacement. It was very easy to replace and had very helpful instructions. My machine works great! Thank you!

Fixed my issue of my machine not powering on. Easy swap. Support from Clive was great!