Standard E61 Group Head Maintenance Kit

If you have the Quick Mill Lucca M58 that Clive sells, this is the one to get.

Worked perfectly on my Profitec 500 PID espresso machine 👍

Did not fit. It’s a lil too big.

The gasket was very tight. It seemed like the outside diameter was a little too large. Clive Tech help suggested to let the group head cool of and then heat the gasket in hot water before trying to reinstall the new gasket and dispersion screen. Clive Coffee is super responsive and knowledgeable!

Very hard to put in the group head. Clive should just tell people to buy the better silicon version.

My very wonderful Rocket Cellini leaked at the grouphead for months, while I bought various replacement gaskets from the other online coffee equipment suppliers. They didn't fit, and when I complained I was just dismissed. Clive paid attention, and advised me to use lubrication (which they sold me in a very small quantity). Worked like a charm, and so again does my espresso machine.

My espresso maker was long overdue for group head maintenance. Very easy to install, got the job done in minutes.

The best part of the kit was the technical support on the phone helping me change the part out snd replace it w the new one The technical support team has always delivered

Clive coffee ....wonderful machines...wonderful people who walk the talk of customer service....attentive, patient, responsive.

took a flat head screwdriver and two minutes to install, just follow the video. working great.

Works great! Easy to install.

Arrived promptly as described.

Great to have parts on hand for future replacement

The on-line chat helped me get the right maintenance kit and additional silicone gasket. I used the Clive maintenance video to do a proper job with the replacement. Easier than I expected.

Perfect fit

I've replaced 3 of these and it doesn't get easier.

Easy to change and perfect fit.

I needed to replace my ECM Synchronika gasket and group head due to normal wear and tear and these worked seamlessly. They fit perfect, and my shots and shot times didn't skip a beat when I changed it out!

Works great in my Anita Quickmill coffee maker!

Just what I needed- about 2 years overdue. Do yourself a favor and order 2 so you have parts on hand for annual maintenance. My old gasket was rock hard, so I wasn’t getting a good seal. Learned these should be replaced once a year.

The gasket replacement went smoothly. There was some molykote included, and that made it go in easily (last time had done it "dry"). The handle now tightens to "5 o'click", however, unlike its predecessor. But this doesn't seem to have any functional impact.

Wasn't that great for my Profitec Pro 500 - it seems to be somewhat taller than the original one, making securing the portafilter a real pain - it would hardly rotate more than 15-20 degrees. I've ended up replacing it with a silicone gasket by Cafelat, which works perfectly.

You've got to keep up with maintenance and Clive's makes it easy and very affordable. So, back to making perfect espresso drinks in just a few minutes.

Great service! My maintenance kit arrived within just a day or two of ordering. Thank you!!!

Perfect fit with both the group head kit and pressure gauge for my old ECM Giotto. Customer service could not have been better and Julia was extremely helpful with helping me find what I needed. Thanks much!

Perfect fit with both the group head kit and pressure gauge for my old ECM Giotto. Customer service could not have been better and Julia was extremely helpful. Thanks much!

fits perfectly and easier to install than i had thought it would be. cool that it comes with the lubricant. makes me think i should replace the screen more often - or at least remove it and clean it. i found it interesting how much debris was behind the screen. maybe i need to backflush more frequently.

Very good

While a bit silly expensive, it is the best knock box I've found that meets all my requirements for quality, space and looks

Quick delivery and part was perfect

Great fit, easy to replace.

This replacement gasket was too thick for the ECM Synchronika. It worked, but made the grouphead fit too tightly. I ordered an 8mm silicone gasket elsewhere which fits much better, more like the original ECM gasket. The screen was also not an exact match for the ECM, (larger hole size, less holes) but fits fine.

Wish it came with a silicone gasket

I needed to replace the gasket and having the entire kit, especially the lubricate, made all the difference in making it a simple job.