Heating element gasket used on ECM and Profitec espresso machines including the Pro 300, 500, 600, 700, 800, Classika, Mechanika, and Synchronika.
These gasket can be green, gray, or black. The color does not affect functionality.
P9013
Heating element gasket used on ECM and Profitec espresso machines including the Pro 300, 500, 600, 700, 800, Classika, Mechanika, and Synchronika.
These gasket can be green, gray, or black. The color does not affect functionality.
P9013
The Clive Difference
⭐️⭐️⭐️⭐️⭐️ 9,000 5-star reviews
We don't just sell equipment, we are your partner in your espresso education.
Every machine is hand-selected by our team of coffee obsessives. If we wouldn't buy it - it's not on our site.
Backed by real-world testing and years of industry experience.
From your first question to your thousandth shot, we’re here.
Don't take our word for it.
Replacement gasket for boiler heating elements in espresso machines. Customers said it's "necessary with heating element" and provides a "perfect fit." Resolves leaking issues after years of high-temperature use. Easy installation. One customer reported continued leaking after repair, suggesting occasional effectiveness concerns.
- Part arrived quickly and as described. Installation was straightforward and successful.
- Perfect fit as expected
- Solid gasket. Way better to put this one in for the old one.
Every two to three years this rubber gasket is becoming less flexible, which means the brew or the steam boiler on my ECM Synchronika will start to leak. After experiencing such leaks I successfully replaced the gasket. Adding appropriate lubrication will help to keep this gasket flexible and less brittle with time. It is good to always have a spare gasket at home in case a leak is developing. The photos below show the old (black) and new (green) gasket and the bottom of the brew boiler where the gasket is installed between the heating element and the boiler.
Steam Boiler leaks worse now that I changed the gasket. Have to leave the Pro 700 on all the time. If it cools, it leaks horribly when heating.
Part arrived quickly and as described. Replacement for original service boiler gasket in ECM Synchronika (slow leak after 8 years of daily use). Installation was straight forward and successful. What more can I want?
For Profitec and ECM dual boiler owners it’s good to have one of these gaskets on hand. It’s only a matter of time before the installed gasket fails under the constant high temperatures.
Perfect fit as expected
Necessary with heating element
I was able to install the new gasket and the machine no longer leaks. Thank you very much. David
The repair took over a month and it is still leaking in the same spot. We already had it dropped at Clive the previous month so two tries, 6 weeks with no machine and still unfortunately leaking
Solid gasket. Way better to put this one in for the old one, rather than smear the old one with room temperature vulcanizing silicone, which is what a prior technician did!
A must if you’re replacing the heating element on your Profitec or ECM machine. I replaced the steam boiler heating element on my Profitec Pro 600 and this was an OEM replacement part. Thanks to Clive Coffee for reminding me to purchase this!
I thought for sure the boiler was bad. Water was sitting on my counter every morning after using the ECM. I ordered a boiler but was told by the folks at Clive that it was the gasket not the boiler...... easy fix thanks Clive