Relay used for Profitec Pro 300, 700, 800, and ECM Synchronika espresso machines.
P6031
Product Variation Disclaimer: Please note that the manufacturers may source components from various suppliers. As a result, the part you receive may differ in color, material, or finish from the product image. These variations do not affect the fit, form, or function of the part unless explicitly stated in the product description.
In-stock items ship within 1-business day.
Free shipping on orders over $75. To be eligible for free shipping, the final order amount, after applying any discounts, including rewards points, must exceed $75.
Returns are accepted up to 30 days from the date the order was delivered. Smallware items must be unused. Open Box and Certified Pre-Owned are non-returnable.
At Clive, we're not just selling coffee equipment — we're your long-term partner in the craft. Every machine we carry is hand-selected by our team of espresso obsessives, backed by real-world testing and years of industry experience. We offer unbiased guidance, lifetime support, and a genuine love for helping you find the setup that's right for you. From your first question to your thousandth shot, we're here.
Appreciated the great customer support. Machine is up and running again!
Impressive setup AND latte art!!
Great product to have on hand in the event of failure of the stock smaller SSR. Installation would be challenging given the space constraints inside the ECM Technika. I tested the SSR upon arrival and it performs to specifications.
My old one was leaking voltage when turned off. Clive had one in stock, priced fairly. Thank you
Exactly what I needed with my ECM heating up and then shutting down. Adam diagnosed the issue before I could even finish explaining the problem and the R&R could not have been easier.
Just the part I needed to fix my Profitec 500 Pro PID that failed the smaller part. I think this one would be a tight fit in the stock location but moving it to the side of the water tank on the floor of the machine allows it to use the floor as a much larger heat sink and avoid the heat of the boiler for a longer life. Working great!
My Profitec Pro 500 was losing pressure after working properly at first power up. Sometimes it would go to zero, but most time I just lost steam pressure and it was most noticeable when frothing milk. This SSR fixed me right up. Hopefully it lasts longer than its younger brother.
Replaced smaller SSR in ECM machine. Works perfectly
It did the trick
My Profitec Pro 500 PID machine keep having trouble with boiler pressure and low temp. After replacing the stock solid state relay with the new "larger" solid state relay my machine has operated perfectly. Thanks Clive Coffee!!!!
Works well as a replacement of the smaller one
Easy fix . Larger than original part but plenty of room to attach.
Easy to replace with the support from Clive.
The item I received was different than in the photograph, but was the exact same part that was in my machine. I don't know if Profitec used different relays over production runs. Took about 10 min to remove cover, replace relay, replace cover. Exact part, exact fit, what is there not to like? Now, symptoms. Months ago, my machine started to warm up no problem, then after some time, I would notice the boiler pressure would start to come down, then I would check the PID to see the temperature had dropped. Turning the machine off then on again seemed to solve the problem (at the time). It wouldn't happen too frequently, but it did increase in frequency over time. Not every single time I used the machine I would have the problem. Then at one point, it finally stopped heating up altogether. If you start to see these symptoms, order the relay and have it ready to go so that you aren't a dunce like me, waiting for a part to come in the mail.
I would have given it a 5 as it works great but it does not fit well in the machine.
Very happy with Clive coffee there support is always top notch!
The relay on my Profitec Pro 500 started acting flaky and a morning without coffee would be a very bad thing. Another seller didn't have the original part but Clive had this one. I'm glad they were out of stock as this unit is much larger than the original (think much more robust). I drilled a hole in the heat sink/bracket so I could screw it down tight, added some thermal paste which was probably not necessary given the size but it's working perfectly.
Thanks Clive.
I have a 2 yr old Profitec Pro 500 PID. The steam pressure and heat wouldn't hold. None of the Whole Latte Love suggestions worked and a local appliance repair shop charged me $250 to "clean it." This was out of stock for some time, but when is was back in and I replaces the part, it completely fixed the issue.
Relay is bigger than the original one in my profitec pro 500 PID and is a different part number that original which is KS53. Large in the description is correct and was a tight fit in the machine and was able to secure it with only one of the two screws from the original. So far so good but wish it was smaller.
Thanks for the feedback!
Exactly the same as the original part. Fair price and shipped quickly.
Thanks for the review!
The relay fixed my problem. The new relay can handle more power than the original unit. The original unit was under rated, Profitec should not have saved a few cents to cause this to happen, I am a little disappointed with their choice.
I had an issue where the steam pressure on my Pro 500 PID would drop pretty low after the machine had been turned on past a certain time (> 30 minutes or so). After doing a bit of research, this issue seemed to be fixed by replacing the SSR as it got too hot and failed. So, I ordered this replacement relay, and the problem has not occurred again after a few tests. As mentioned in the other review, this SSR is indeed quite a bit larger, but it still fits fine in the machine.
